Inkbird ITC308S Freezer Temperature Controller Heating Cooling Plug Thermostat Pre Wired Digital 2 Stage Temp Control Outlet for Greenhouse Heater Cooler Incubator Reptile with Short Probe Sensor
(as of [price_update_date] – Details)
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low-temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect the temperature controller from violent change.
Temperature Control Range : -50~120 °C / -58~248 ° F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy:±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
Supports Centigrade or Fahrenheit unit display.
The sensor can easily be replaced.
Maximum output load: 1100W (120V).
Alarm when over-temperature and sensor error.
Dual display window, be able to display measured temperature and set temperature at the same time.