Pyle Ceiling Speakers – Stereo Home Theater Speakers – in Wall Speakers Flush Mount & Home Audio Power Amplifier System – 2X40W Mini Dual Channel Mixer Sound Stereo Receiver Box w/AUX, Mic Input

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: [price_with_discount]
(as of [price_update_date] – Details)

Pyle Ceiling Speakers – Stereo Home Theater Speakers – in Wall Speakers Flush Mount – 8-Inch White 250 Watt, 2-Way, (Pair) (PDIC86)
PyleHome Model : PDIC86 8.0” Home In-Wall / Ceiling Speakers 8.0” In-Wall / In-Ceiling Dual Stereo Speakers, 2-Way Flush Mount (250 Watt) Features: In-Wall / In-Ceiling System 2-Way Stereo Sound Speakers Includes (2) 8.0-inch Speakers 1/2” High Compliance Polymer Tweeter Polypropylene Cone with Rubber Edge Mounts Flush on Walls or Ceilings Built-in Electronic Crossover Network Nature Friendly ABS Construction Perfect for Custom Installations & Applications Includes Changeable Round & Square Stain Resistant Grills Cut-Out Template for Easy Installation
What’s in the Box: (2) 8” -inch Wall Speakers (2) Round Speaker Grills (2) Square Speaker Grills
Technical Specs: 250 Watt Rated Peak Power Impedance: 8 Ohms Sensitivity: 89 dB Frequency Response: 40Hz-20kHz Total Unit Dimensions (Diameter x Depth): 11.3” x 3.9” -inches Cutout Diameter: 9.4”, Cutout Mounting Depth: 3.6” -inches Sold as: Pair Weight: 9.91 lbs. The Pyle PDIC86 two-way dual speakers deliver stereo sound to any room in your home or office without cluttering floor space. Each unit in the pair measures 8.0” diameter and come equipped with .5” high compliance polymer tweeter for a full, rich sound. Speakers are made of nature friendly ABS material and include stain resistant grills. System comes with changeable round and square grill covers and cut-out template for easy and quick installation. They mount flush for a clean look on walls or ceilings. Achieve more wide-ranged sound performance and add audio to any room with the PDIC Dual Stereo Speaker Systems.

Home Audio Power Amplifier System – 2X40W Mini Dual Channel Mixer Sound Stereo Receiver Box w/ AUX, Mic Input – For Amplified Speakers, PA, CD Player, Theater via RCA, Studio Use – Pyle PTA2
Front View
Click here for a larger image Connection Diagram
Click here for a larger image Stereo Power Amplifier
Click here for a larger image Back View
Click here for a larger image The Ultimate Stereo Power Amplifier This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 40 Watt to handle all your audio needs. Switchable Mixing (Karaoke) Mode When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included) Switchable MIC Pager Mode When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -10dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system. L/R Speaker Terminals Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohm per channel at stereo mode. 110/220 Voltage Selector This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating. 1/4-Inch Phone Jack Accepts headphones with 1/4-inch plugs. 1/4-Inch Microphone Input Jack Accepts microphones with 1/4-inch plugs. REC RCA Output Lets you connect the amplifier to a tape deck for recording. Take Control Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble Replaceable Power Fuse The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included) Additional Features Harmonic Distortion: 0.3% 2 x 40 Watt RMS at four Ohm Blue LED Output Level Display Frequency Response: 20 Hz-20 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz) Dimensions: 7.48 x 2.75 x 5.39 inches
PyleHome Model: PTA2Compact Home Audio Stereo Power Amplifier, 2 x 40 WattMini Desktop Audio Amplifier with AUX, CD & Mic Inputs RCA REC Output Balance Control 1/4″ Mic Input Jack Power On LED Indicator Headphone Output Jack 110/220 Voltage Selector2 X 40 Watt Max At 4-Ohm Four Push Type Speaker L/R Terminals Switchable Mic Pager And Mixing Modes Switchable RCA Inputs: AUX1, AUX2 & CD Bass, Treble, Master Volume & Mic ControlsDimensions: 7.48”W x 2.76”H x 5.39”DPyle Pro’s PTA2 combines the usefulness of a small, take-anywhere amplifier with a full featured mixer. Three stereo line-level inputs and a 1/4″ microphone input are provided for source connection and mixing. A pager switch provides source attenuation for microphone priority. Stereo recording is made possible by the built-in line-level outputs. Balance, tone, speaker volume, microphone volume, power, and source selection controls are front-mounted for quick adjustment

Product 1: FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for simple and easy in-wall / in-ceiling installation. The product includes the cutout dimension at 9.4” in diameter x 3.6” in depth and environmentally friendly ABS construction
Product 1: 40Hz – 20kHz FREQUENCY RESPONSE: Pyle 8.0” speaker system has a 1/2’’ polymer tweeter and frequency response. This flush mount speaker is pack with exceptional 8 ohm impedance rating and impressive 250 watts power handling capability
Product 1: 250 WATTS PEAK: Pyle in-wall speaker system were carefully combined to reproduce sound clearly with outstanding responsiveness. It can achieve wide-ranged sound performance speakers secure as well as extending the life of the product
Product 2: Output Wattage: 80
Product 2: Included Components: 1 Pyle-Home Branded Product


User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “Pyle Ceiling Speakers – Stereo Home Theater Speakers – in Wall Speakers Flush Mount & Home Audio Power Amplifier System – 2X40W Mini Dual Channel Mixer Sound Stereo Receiver Box w/AUX, Mic Input”

Your email address will not be published. Required fields are marked *

Enable registration in settings - general
Compare items
  • Total (0)